Part #: TR-3A
The CheckSum Model TR-3A Fixture System allows CheckSum Test Systems to be interfaced to the unit-under-test (UUT) via a Bed-of-Nails Vacuum Fixturing system.
The 50-pin ribbon cables from the Test System electronics attach directly to mating connectors on the back of the Fixture Receiver. Internal to the Receiver, cabling carries the signals to pin blocks with spring probes that provide a reliable interface to easily interchanged test heads which are customized for each UUT or family of UUTs.
The Model TR-3A Receiver Assembly accommodates up to 1500 test points and uses industry-standard GenRad 2270-compatible test head kits. The Receiver provides for connection of your vacuum pump via a 1-1/4″-hose connection. The TR-3A has an automatic control valve that is remotely controlled by the test program.
For each 150 test points connected to the Receiver, a Model TR-3-1 pin block with internal wiring and back panel connectors is needed.
Test heads can be obtained locally and customized for your specific application, or kits can be purchased directly from CheckSum. The Model TR-3-1620 is 40.6 x 50.8 cm (16 x 20 in) and the Model TR-3-2024 is 50.8 x 60.96 cm (20 x 24 in). For each 150 test points used for testing, a Model TR-3-2 Interface Block is required in the test head. CheckSum can also provide complete custom fixturing solutions or provide referrals.